How to Find Hard Drive Information Windows 10

In Windows 10, you can find your drive type for drives installed in your PC without restarting your PC or disassembling it. No third party tools required.

HDD stands for hard disk drive. HDDs are the traditional spinning hard drive device that is used to store all your data. Hard drive technology is old. First devices were created in 1956. The classic hard drive is an electro-mechanical data storage device that uses magnetic storage to store and retrieve digital information using one or more rigid rapidly rotating disks coated with magnetic material. They include magnetic which read and write data to the disk. Data is accessed in a random-access manner, meaning that individual blocks of data can be stored or retrieved in any order and not only sequentially.

SSDs (Solid State Drives) are modern storage devices. An SSD serves the same purpose asa hard drive. However, it doesn't include moving parts, storing your data on flash memory chips. SSDs provide the incredible read and write speed. A modern computer with an SSD starts in a few seconds. SSDs consume less power than HDDs and produce no noise.

While SSDs are great devices, they are still expensive. Usually, a consumer SSD unit have less capacity that a classic hard drive for the same price. Older models of SSDs often suffer from flash memory wear-out, but the issue seems to be gone for modern SSD devices.

There is a simple but effective method you can use to find if you have HDD or SSD installed in your Windows 10 computer. You need no third-party tools, and you can avoid PC disassembling. Here is how.

To Find If You Have HDD or SSD in Windows 10,

1. Open File Explorer.
2. Navigate to the This PC folder.
3. Right click the drive you want to defrag and selectProperties from the context menu.
4. Switch to theTools tab and click the buttonOptimize underOptimize and defragment drive.
5. In the next window,see the 'Media type' column. It shows the drive type for each of installed drives.
   

You are done.

Tip: You can save your time and Add Optimize Drives Context Menu in Windows 10.

Note: If you are running Windows 10 build 18898 or above, you can use Task Manager.

Find Drive Type (HDD or SSD) Using Task Manager

1. Open the Task Manager.
2. If it looks as follows, switch it to the full view using the "More details" link in the bottom right corner.
3. Switch to the Performance tab.
4. You'll now be able to see the disk type.

You are done.

Finally, you can use PowerShell to find the drive type with a special cmdlet, Get-PhysicalDisk.

Find If You Have HDD or SSD in PowerShell

1. Open PowerShell as Administrator.
   Tip: You can add "Open PowerShell As Administrator" context menu.
2. Type or copy-paste the following command: Get-PhysicalDisk | Format-Table -AutoSize
3. In the output, see the MediaType column value for each of your drives.

That's it.

Related articles:

• How to Trim SSD in Windows 10
• How to see if TRIM is enabled for SSD in Windows 10
• How to Defrag a Drive in Windows 10
• How to Enable TRIM for SSDs in Windows 10
• How to install Windows 7 on a PCI Express (NVMe) SSD

Support us

Winaero greatly relies on your support. You can help the site keep bringing you interesting and useful content and software by using these options:

If you like this article, please share it using the buttons below. It won't take a lot from you, but it will help us grow. Thanks for your support!

How to Find Hard Drive Information Windows 10

Source: https://winaero.com/find-if-you-have-hdd-or-ssd-in-windows-10/

Share this post